496 - Tektronix Spectrum Analyzers





496 - Tektronix Spectrum Analyzers

The Tektronix 496 provides high performance spectrum analysis and measurements in the 1 kHz to 1.8 GHz range.Its high stability and 80 dB dynamic range meet your demands for proof-of-performance measurements, on site or on the bench.

Resolution bandwidth can be varied from 1 MHz to 30 Hz over the entire frequency range. Automatic phase lock stabilization reduces incidental FM to 10 Hz p-p; phase noise sidebands are at least -75dBc at 30 times the resolution bandwidth offset.

Frequency drift with phase lock is typically 1 kHz in ten minutes after 30-minute warm-up. The 496 provides 1 kHz frequency resolution in Delta-F mode.

  • 50 Ohm/75 Ohm Selectable Inputs
  • 1 kHz to 1800 MHz Coverage
  • Amplitude comparison in 0.25 dB steps
  • 1 kHz frequency resolution in delta-F mode
  • Fully calibrated amplitude in dBm or dBmV The 496 provides high performance spectrum analysis and measurements in the 1 kHz to 1.8 GHz range.Its high stability and 80 dB dynamic range meet your demands for proof-of-performance measurements, on site or on the bench.
  • Resolution bandwidth can be varied from 1 MHz to 30 Hz over the entire frequency range. Automatic phase lock stabilization reduces incidental FM to 10 Hz p-p; phase noise sidebands are at least -75dBc at 30 times the resolution bandwidth offset. Frequency drift with phase lock is typically 1 kHz in ten minutes after 30-minute warm-up. And the 496 provides 1 kHz frequency resolution in Delta-F mode
  • 80 dB Dynamic Range
Specifications
Low end frequency limit
1.00 kHz

High end frequency limit
1.80 GHz

Resolution Bandwidth Min.
30 Hz

Resolution Bandwidth Max.
1.00 MHz

Amplitude Range
n/a

Prestige Test Equipment Inc is an independent distributor and is not affiliated with Agilent Technologies.


Copyright © 2019 Prestige Test Equipment. Powered by Zen Cart