MS420K - Anritsu Spectrum Analyzers

MS420K - Anritsu Spectrum Analyzers

  • 10Hz to 30MHz frequency range
  • 0.01Hz frequency resolution
  • 2 channels (R and T) input channels
  • 50ohm impedance
  • Wide measurable level range of over 150dB, allowing the measured device to be checked at actual operational levels
  • High-performance synthesizer to enable high resolution measurements
  • High- speed measurement of 2ms/point useful for mass production of parts
  • High- precision group delay measurements
  • Logarithmic frequency sweep
  • Level sweep for non-linearity tests
  • Variable input levels make the instrument suitable for characteristics tests
  • Built-in GPIB interface for remote control of front-panel functions
  • Level calibration by using the output of the test-signal source
  • External MG440A Synthesizer or MG443B SLG can be connected to check frequency response of conversion loss at different input/output frequencies
Low end frequency limit
10.00 Hz

High end frequency limit
30.00 MHz

Resolution Bandwidth Min.
10 mHz

Resolution Bandwidth Max.

Amplitude Range

Prestige Test Equipment Inc is an independent distributor and is not affiliated with Agilent Technologies.

Copyright © 2024 Prestige Test Equipment. Powered by Zen Cart