S114B - Anritsu Spectrum Analyzers

S114B - Anritsu Spectrum Analyzers

Anritsu S114C Site Master, 2 MHz to 1600 MHz, Built-in DTF, Built-in Spectrum Analyzer 100 kHz to 1600 MHz

The Anritsu S114C spectrum analyzer is a wide band, very sensitive receiver. It works on the principle of "super-heterodyne receiver" to convert higher frequencies (normally ranging up to several 10s of GHz) to measurable quantities. The received frequency spectrum is slowly swept through a range of pre-selected frequencies, converting the selected frequency to a measurable DC level (usually logarithmic scale), and displaying the same on the CRT of the Anritsu S114C. The CRT displays received signal strength (y-axis) against frequency ( x-axis). Covering the 2 MHz to 1.6 GHz frequency band, the Site Master S113C/S114C site management tools are designed to accurately locate and identify RF cable feed-line and antenna system faults. These models are ideally suited for any experience user in commissioning and maintenance of today'''''s wireless communication system infrastructure including VHF, cellular and GPS applications.

 The S114C features spectrum analysis capability in addition to return loss, VSWR, cable loss and distance-to-fault (DTF) measurements, allowing technicians and field engineers the ability to easily identify and solve RF system problems such as coverage, interference, and other path related signal problems. S114C spectrum analysis ranges from 100 kHz to 1.6 GHz.

  • Handheld, battery-operated design
  • Lightweight at only 4.5 lbs. (including battery)
  • Superior Immunity to RF interference
  • Long Range, High Resolution Fault Location
  • Pop-up cable menus containing over 70 cable types
  • Multilingual user interface; English, French, Chinese, Japanese, Spanish, German
  • Intuitive and easy to use with On-Screen Test Set-Ups
  • Saves 10 Measurement Test Set-Ups
  • Saves up to 200 Measurement Traces Alphanumeric
  • Labeling of Saved Measurements
  • Automatic Time and Date Stamp of Saved Data
  • Rechargeable, Field Replaceable Battery
  • Distance Measurement in Feet and Meters
  • Information Screens Provide Cable Attenuation and Velocity of Propagation values
  • 6 Markers, Limit Lines, and Segmented Limit Lines
  • RF Power Monitor Option (option 5)
  • RS232 Interface
Low end frequency limit
100.00 kHz

High end frequency limit
1.60 GHz

Resolution Bandwidth Min.
10 kHz

Resolution Bandwidth Max.
1.00 MHz

Amplitude Range
–90 dBm to +20 dBm typical

Prestige Test Equipment Inc is an independent distributor and is not affiliated with Agilent Technologies.

Copyright © 2024 Prestige Test Equipment. Powered by Zen Cart