MS8609A - Anritsu Spectrum Analyzers

MS8609A - Anritsu Spectrum Analyzers

The MS8608A and MS8609A are transmitter testers equipped with an internal spectrum analyzer, a modulation analyzer and a power meter.
Just one tester can cover the development and manufacturing of base stations and mobile stations, as well as the construction and maintenance of base stations. 

The MS8608A supports 9 kHz-7.8 GHz and high power inputs up to +40 dBm.
The MS8609A supports 9 kHz-13.2 GHz and input power up to +20 dBm.

The spectrum analyzer has resolution bandwidths up to 20 MHz, meaning that it can readily support measurements of wide-band signals.
It is ideal for evaluating devices such as base station power amplifiers, due to its wide dynamic ranges of 68 dB (typical for 5 MHz offset) and 75 dB (typical for 10 MHz offset) for adjacent channel power (ACP) measurement (sweep method).
The modulation analyzer realizes all Vector Signal Analysis (VSA) functions through high-speed DSP.
The power sensor can perform highly accurate power measurements of ±0.4 dB by using an amorphous power sensor.

Up to three measurement software options (such as W-CDMA, GSM/EDGE, HSDPA, WLAN/802.11, CDMA, 1xEVDO) can be installed simultaneously.
Input signals can be selected from RF or I/Q inputs.
For I/Q signals, balanced or unbalanced input can also be selected.

Each tester can be equipped with optional GPIB, RS-232C, and 10BASE-T Ethernet interfaces for remote measurement.
High-speed GPIB data transmission of 120 kbyte/sec enables high-speed measurement on the manufacturing line.
The monitor uses an easy-to-see TFT color LCD.

Low end frequency limit

High end frequency limit

Resolution Bandwidth Min.

Resolution Bandwidth Max.

Amplitude Range
Amplitude reference level setting range: 100 to +30 dBm

Prestige Test Equipment Inc is an independent distributor and is not affiliated with Agilent Technologies.

Copyright © 2024 Prestige Test Equipment. Powered by Zen Cart