11715A - Agilent HP Signal Generators

11715A - Agilent HP Signal Generators

Agilent 11715A AM/FM test source provides very flat, wide-bandwidth, and low-distortion amplitude - or frequency-modulated RF signals. Designed primarily for performance tests and adjustments of the Agilent 8901A/B modulation analyzer and Agilent 8902A measuring receiver, it will also serve as a high-quality modulated test oscillator where its frequency ranges apply.

The major components of the 11715A are a low-noise voltage-controlled oscillator (VCO), 2 digital dividers, and a double-balanced mixer. The VCO is the primary signal source, with a typical frequency range of 330 to 470 MHz at the FM output. FM is produced by directly coupling the external modulation source to the tune input of the VCO, providing very wide bandwidth modulation with low phase shift. This design also ensures very little incidential AM. The Agilent 11715A can also be used in conjunction with an 8901A/B and an 8902A as a calibrated signal source for special applications. In particular, the U.S. commercial FM broadcast band of 88 to 108 MHz is covered by the FM divide-by-4 output of the 11715A.

  • High-quality modulated test oscillator
  • Wide bandwidth modulation with low phase shift
  • Designed for low incidential AM
  • Frequency range
    AM FM ÷ 32 output: 11 to 13.5 MHz
    FM ÷ 4 output: 88 to 108 MHz
    FM output: 352 to 432 MHz
  • Distortion
    50% AM, 20 Hz to 100 kHz rates: <0.05% THD (<–66 dB)
    95% AM, 20 Hz to 100 kHz rates: <0.1% THD (<–60 dB)
Frequency Range Min.
11.0 MHz

Frequency Range Max.
432.00 MHz


Output Power
-20 dBm to +3 dBm

Freq. Resolution

Prestige Test Equipment Inc is an independent distributor and is not affiliated with Agilent Technologies.

Copyright © 2023 Prestige Test Equipment. Powered by Zen Cart