XPF Series - 350W - Sorensen Power Supplies DC





XPF Series - 350W - Sorensen Power Supplies DC

The Sorensen XPF is a new type of bench power supply designed to meet the need for flexibility in the choice of voltage and current.
Typically, the maximum voltage and maximum current are not required simultaneously.
The PowerFlex design enables higher currents to be generated at lower voltages within an overall power limit envelope.


The XPF is a dual output programmable DC power supply with two completely independent and isolated 175W outputs.
If required, the outputs can be wired in series or parallel to achieve voltages up to 70V or current up to 20 A.
Each output can provide 35 Volts at a maximum current of 5 Amps.
As the voltage setting is reduced the output current capability increases up to a maximum of 10 Amps.
This is achieved by using the latest switch-mode technology.

  • Power Factor Correction (PFC)
  • Individual on/off switch per output
  • Dual isolated outputs
  • PowerFlex design gives variable voltage/current combinations
  • Coarse and fine voltage controls
  • Simultaneous display of output voltage and current for each output
Specifications
Number of Outputs
Dual

Max. Voltage
42.0 V

Max. Current
20.00 A

Ripple and Noise
5 mVrms max

Computer Interface
No

Prestige Test Equipment Inc is an independent distributor and is not affiliated with Agilent Technologies.


Copyright © 2020 Prestige Test Equipment. Powered by Zen Cart