8501A - new version - Giga-tronics Power Meters RF





8501A - new version - Giga-tronics Power Meters RF

The Giga-tronics 8500A Series Peak Power Meters combine CW power measurement with the ability to make precise peak power measurements at any point on a pulsed waveform.
This dual, built-in capability lets you make CW measurements and analyze pulsed waveforms with a single instrument.


The meter is available in a single or dual channel configuration.
A built-in display shows measurements such as rise time, fall time and pulse width plus the pulse profile.
And you can use a reference cursor to read peak power at any point on the pulse waveform.


Giga-tronics CW and Peak power sensors contain an EEPROM programmed with the frequency calibration factors measured at the factory, or in your cal lab.
When you key in the frequency at which power is being measured, the meter automatically applies the correct cal factor from the sensor EEPROM.

  • Rise time < 15 ns
  • Sensor frequency range from 0.03 or 0.75 to 18.5, 26.5 or 40 GHz
  • Power Range: -20 to +20 dBm Pulse; -40 to +20 dBm CW
  • Measurement resolution is 100 ps
  • Measure the same point on repetitive pulses at over 70 measurements/second
  • Built-in power sweep calibrator with NIST traceable accuracy
Specifications
Channels
1

Freq. Range Low
30.00 MHz

Freq. Range High
40.00 GHz

Sensor Type
Diode

Computer Interface
GPIB, internal MATE option

Sensors
High speed (16936A, 16937A, 17266A, 17071A), Low frequency (16934A, 16935A, 17267A)

Prestige Test Equipment Inc is an independent distributor and is not affiliated with Agilent Technologies.


Copyright © 2020 Prestige Test Equipment. Powered by Zen Cart