E4416A - Agilent HP Power Meters RF





E4416A - Agilent HP Power Meters RF

The Agilent E4416A single channel EPM-P series power meter, for peak, average, peak-to-average ratio and time-gated measurements, using the E9320 peak and average power sensors.

  • 20 Msample/s per second sampling rate for reliable continuous and single shot measurements on wide bandwidth signals
  • Time-gated and free run power measurements
  • Free Analyzer Software software for complete pulse and statistical analysis, software is located In the Library
  • 8 pre-defined wireless configurations (GSM, EDGE, NADC, iDEN, Bluetooth™, IS-95 CDMA, W-CDMA and cdma2000)
  • Frequency range: 9 kHz to 110 GHz, sensor dependent
  • Power range: -70 to +44 dBm, sensor dependent
  • Display resolution: Selectable resolution of 1.0, 0.1,0.01, 0.001 dB in logarithmic mode, or 1 to 4 significant digits in linear mode.
  • Offset range: ±100 dB in 0.001 dB increments, to compensate for external loss or gain
  • Single sensor dynamic range
    • E-series E9320 peak and average power sensors:
      70 dB maximum (normal mode); 85 dB maximum (average only mode)
    • E-series CW power sensors: 90 dB
    • E-series E9300 average power sensors:80 dB maximum
    • 8480 series sensors: 50 dB maximum
Specifications
Channels
1

Freq. Range Low
9.00 kHz

Freq. Range High
110.00 GHz

Sensor Type
n/a

Computer Interface
GPIB, RS-232, RS-422

Sensors
8430; E-series CW and E9320, E9300

Prestige Test Equipment Inc is an independent distributor and is not affiliated with Agilent Technologies.


Copyright © 2020 Prestige Test Equipment. Powered by Zen Cart