mOPM-A1 - JDSU Optical Power Meters





mOPM-A1 - JDSU Optical Power Meters

The Multiple Application Platform (MAP) Optical Power Meter (mOPM-A1) is optimized for the industry-leading JDSU MAP-200 platform.Based on the previous-generation MAP, The MAP-200 is the first photonic layer lab and manufacturing platform that is LAN Extensions for Instrumentation (LXI)- compliant by conforming to the required physical attributes, Ethernet connectivity, and interchangeable virtual instrument (IVI) drivers.The MAP-200 platform is optimized for density and maximum configurability to meet specific application requirements in the smallest possible foot print.JDSU offers two types of MAP Optical Power Meters: with a 3 mm Indium-Gallium-Arsenide (InGaAs) detector and a 10 mm Germanium (Ge) detector.The MAP InGaAs Optical Power Meter is optimized for applications using single-mode (SM) or multimode (MM) fiber to measure power levels from -80 to 10 dBm over the wavelength range of 800 to 1650 nm.It features high accuracy, high linearity and extremely low polarization dependant loss (PDL).The MAP InGaAs Optical Power Meter Cassette with 3 mm InGaAs detector is available in single or dual configuration and comes with an analog electrical output for external monitoring.The averaging time can be set as low as 100 microns (_s) for high-speed applications.For ultimate flexibility, the detector heads were designed with JDSU AC100 interchangeable detector adapters that are available for six connector types as well as a fiber holder that permits bare fiber measurements.The MAP InGaAs Optical Power Meter is supplied with an FC detector adapter as a standard accessory and an optional integrating sphere may be fastened to the front panel for increased power measurement to 33 dBm (2 W) with decreased PDL to 0.005 dB.The MAP Ge Optical Power Meter can be used in applications using standard SM or MM fiber as well as SM or MM ribbon cable with fiber counts as high as 72.The MAP Ge Optical Power Meter can accurately measure power levels from -50 to 3 dBm over the wavelength range of 800 to 1650 nm.The detector heads are compatible with the JDSU AC400 series interchangeable detector adapters.The MAP Ge Optical Power Meter is supplied with an FC detector adapter as a standard accessory.
Specifications
Type
Fiber Optic

Measurement Units
dB, dBm, Watt

Low end wavelength limit
800 nm

High end wavelength limit
1650 nm

Power Range
-80 dBm to +10 dBm

Accuracy
2.5% uncertainty at reference condition

Prestige Test Equipment Inc is an independent distributor and is not affiliated with Agilent Technologies.


Copyright © 2020 Prestige Test Equipment. Powered by Zen Cart