FCA3020 - Tektronix Frequency Counters





FCA3020 - Tektronix Frequency Counters

The FCA3000 and FCA3100 Timer/Counter/Analyzer Series pack many different functions into one feature-rich instrument.
With industry-leading frequency and time resolution, the FCA Series comes standard with deep internal memory and a fast data transfer rate of 250k Samples/s to internal memory.
In addition, the multi-parameter display shows auxiliary measurements alongside your main measurement to provide you with the results you need at a glance.
With the industry’s most comprehensive analysis modes, including measurement statistics, histograms, and trend plots, you have the tools you need to quickly and accurately analyze your signal.

  • Key Performance Specifications
    • 300 MHz, 3 GHz, 20 GHz Models
    • Up to 3 Input Channels
    • 50 ps (FCA3100 Series) or 100 ps (FCA3000 Series) Single-shot Time Resolution
    • 12 Digit/s Frequency Resolution
    • 0.001° Phase Resolution
    • 3 mV or better Voltage Resolution
    • Optional 5×10–8 High-stability Oven Time Base
  • Measurement Throughput
    • 250k Sample/s Data Transfer Rate to Internal Memory (Up to 3.75M samples stored)
    • Up to 15k Sample/s Data Transfer Rate over USB/GPIB Bus(Block mode)
    • Up to 650 Individually Triggered Measurements/s
  • Available Functions and Features
    • Automated Measurements: Frequency, Period, Ratio, Time Interval, Time Interval Error, Pulse Width, Rise/Fall Time, Phase Angle, Duty Cycle, Maximum Voltage, Minimum Voltage, Peak-to-Peak Voltage
    • Totalize Measurement (FCA3100 Series)
    • Multi-parameter Display
    • Trend Plot Mode
    • Measurement Statistics Mode
    • Histogram Mode
    • Allan Deviation
    • Zero Dead-time Frequency/Period Measurements
    • Continuous Data Streaming over USB/GPIB Bus during Measurement (FCA3100 Series)
    • Programmable Pulse Output from 0.5 Hz to 50 MHz
  • Connectivity
    • Optional Rear-panel Inputs
    • USB Device and GPIB Ports on Rear Panel for Quick PC Connectivity
    • GPIB Interface Supports Full SCPI-compatible Programmability and offers an Emulation Mode for Plug-and-Play Replacement in Existing ATE Systems
    • External Arming Input
    • 10 MHz Reference Oscillator Output
    • Includes National Instrument’s LabVIEW SignalExpress™ TE Limited Edition Software for Connecting Your Bench
    • Optional TimeView™ Software Available for Modulation Domain Analysis
  • Unique graphical multi-paramater display
  • Autoset function sets optimum trigger levels and hysteresis adapted to the actual signal applied
Specifications
Status
n/a

Minimum Frequency
1.0 mHz

Maximum Frequency
20.0 GHz

Frequency Resolution Digits
12

Measurements
Frequency, Period, Ratio, Time interval, Rise/Fall Time, Duty factor, Pulse width, Voltage, Burst freq., True RMS

Prestige Test Equipment Inc is an independent distributor and is not affiliated with Agilent Technologies.


Copyright © 2024 Prestige Test Equipment. Powered by Zen Cart