33502A - Agilent HP Amplifiers





33502A - Agilent HP Amplifiers

The Agilent 33502A is a dual-channel, high voltage output amplifier for use with Agilent Function/Arbitrary Waveform Generators to offer low-distortion, higher voltage outputs. It has an isolated analog front end with up to 50 Vpp (±25 V) output voltage range and a very low-distortion amplifier with <0.01% @ 10 kHz and 40 Vpp.The 33502A has a fully isolated front end, which offers superior 5X voltage amplification to other amplifiers. You can independently configure input coupling (AC|DC) and input impedance (50_|1M_) to match you circuit. The input path can also be switched from amplified to direct (unamplified) without removing or connecting cables.The 33502A is compatible with existing Agilent function/arbitrary waveform generators including the 33120A, 33210A, 33220A, and 33250A. It can also be used to amplify signals from non-Agilent function and arbitrary waveform generators.
  • Full-power BW 100 kHz @ 50 Vpp
  • Small-signal BW >300 kHz
  • Slew Rate 20 V/μs min.
  • THD+N <0.01% @ 10 kHz, 40 Vpp
  • Output drive 200 mA max.
  • Isolation Floats ±42V pk to earth
  • USB and LAN (LXI-C)
Specifications
Status
n/a

Rated Power Output
n/a

Frequency Range - Low
n/a

Frequency Range - High
300.00 kHz

Output P1dB
n/a

Gain
n/a

Gain Range
Gain is 5x

Noise Figure
Input referred noise is <40nV/rt-Hz@1kHz

Prestige Test Equipment Inc is an independent distributor and is not affiliated with Agilent Technologies.


Copyright © 2019 Prestige Test Equipment. Powered by Zen Cart