DHP Series - 5 kW to 13 kW - Sorensen Power Supplies DC





DHP Series - 5 kW to 13 kW - Sorensen Power Supplies DC

The DHP family provides models ranging in output power from 5 kW to 20 kW in a single chassis. Programmable output voltages range from 5V to 400 VDC, delivering up to 3,000 amperes. This family has two operational modes, constant-voltage and constant-current.

The DHP family uses control technology that allows 9 auto sequence steps, each step can be up to 99,999 seconds in duration. Combining all the steps allows a maximum auto-step program 27.7 hours long. Various voltages, currents and durations can be programmed for each step.

This family has standard analog and a variety of combinations of IEEE-488.2, RS 232 and/or isolated analog input control interface options.

All models come with the standard Sorensen 5-year warranty and CE Mark.

  • Modular Design : The series has a unique modular design that results in three rackmount profiles according to output power
  • Unique Controls and Commands
    • Power-Off Memory: Enabling the input power and pushing the LAST SET button will restore the supply settings
    • External Shutdown: An external shut down to inhibit the output
    • Up/down arrows control voltages, step changes and current
  • Sequencing
  • Digital Displays
    • Power supply rating
    • Output power, voltage and current
    • All power, voltage and current set points and limits
    • Present and highest AC input voltage
    • Present and highest air inlet temperature
    • Power and auto-step sequence settings
    • Calibration set-up
    • Remote operation set-up 
    • Diagnostics fault status summary
  • Protection and Safety
    • Safe Power-Up: In the local mode, the output is disabled for additional safety at power up
    • Front Panel Lockout: Most front panel controls are disabled when operated remotely
    • Overvoltage, over-temperature, surge limit, soft start, brown out and short circuit protection current limit fold back
  • 5 Year Warranty
Specifications
Number of Outputs
Modular

Max. Voltage
50.0 V

Max. Current
3.00 kA

Ripple and Noise
10 mVrms

Computer Interface
GPIB, RS-232

Prestige Test Equipment Inc is an independent distributor and is not affiliated with Agilent Technologies.


Copyright © 2024 Prestige Test Equipment. Powered by Zen Cart